TMR-1 Ghost Trolling Motor Remote by Lowrance

Control the Ghost trolling motor from anywhere on your boat with the Lowrance TMR-1 Remote.   Set anchor and control the speed and direction of the Lowrance Ghost trolling motor from anywhere on your boat with the lightweight and...

S3100 Sonar Module by Lowrance

The Lowrance® S3100 sonar module brings support for new high-definition Active Imaging™ HD sonar to Elite FS, HDS Carbon and HDS LIVE displays, delivering the clearest, high-frequency (up to 1 Megahertz) SideScan/DownScan Imaging views –...

MKA-52/62 Quick Release Bracket by Minn Kota

For quick, easy removal of your cable-steer, bow-mount trolling motor. Extruded aluminum design with side screw provides quiet and secure locking system. Fits 52", 60", 62" and 72" shaft foot control motors, and 62" shaft hand control motors...

PowerDrive / PowerDrive V2 CoPilot Remote by Minn Kota

For PowerDrive V2, PowerDrive and Riptide SP motors with the CoPilot system (sold separately) installed. This replacement wireless remote gives you control of steering, speed and prop on/off from anywhere on the boat. Features: System is...

MKP-38 Weedless Wedge 2 Replacement Prop by Minn Kota

This 100% weedless prop features a unique, patented design with swept-back and flared blades that “wedge” weeds away while conserving battery power. It helps you move through heavy vegetation – even at slow speeds. Fits 4-1/2"...

MKP-37 Power Prop Replacement Trolling Motor Prop by Minn Kota

Delivers extra power to push through heavy vegetation. Fits 3-5/8" prop diameter. Includes prop pin, nut & washer. Features: For Use With 1.06" Prop/ Drive Pin Fits 3-5/8" Lower Unit Diameter Prop Nut Thread:...

i-Pilot Micro Bluetooth Remote by Minn Kota

i-Pilot and i-Pilot Link give you full command of your trolling motor. But when you want simplified, compact control, grab the new waterproof Bluetooth Micro Remote accessory for quick command of Spot-Lock, speed, steering and Advanced AutoPilot...

i-Pilot Link Remote Holding Cradle by Minn Kota

Secure i-Pilot Link remote to your belt or console with this versatile cradle. Use the belt clip for constant easy access, or remove the belt clip and mount i-Pilot Link cradle to your dash for simple, straightforward operation...

Bluetooth Heading Sensor by Minn Kota

This Bluetooth-enabled heading sensor contains a compass that detects your boat's heading and communicates it to your trolling motor to enable the Spot-Lock Jog feature, which lets you move your Spot-Lock location in 5 ft. increments in any direction...

MKA-55 Stabilizer Kit by Minn Kota

Reduces bounce on bow-mount trolling motors. Equipped with a low profile mounting base that allows stabilizer to be easily removed. Pivoting arm can be folded down when not in use.   Features: Folds down when not in use Easily removable, leaves...

MKR-12 Quick Connect Plug by Minn Kota

For wiring where a plug and socket cannot be used. Heavy-duty 10-gauge connectors.   Features: Motor Side Cable Length – 6.66” Battery Side Cable Length – 11.66” Length overall when Connected – 18...

Raptor 8' Travel Cover by Minn Kota

Protects 8-foot Raptor models from road hazards while trailering. Custom fit with all-weather, corrosion-resistant zipper. UV resistant black neoprene. Not intended for use while on the water.   Features: Protects Raptor from road hazards while...

Talon Port Sandwich Adapter Bracket by Minn Kota

With unparalleled strength and an innovative modular design, mount Talon between your jack plate and transom or between the outboard and transom, on the PORT side of your boat. Keep Talon locked on your boat in any condition.   Features: Two...

MKP-9 Prop Nut Kit by Minn Kota

Quickly, easily remove or replace your prop with this kit. Each kit includes a prop nut and washer. A crescent wrench is required for installation.   Features: Compatible with Minn Kota Props: MKP-2 Vanishing prop (part number 2061121 / 1865002)...

MKP-34 Prop Nut Kit by Minn Kota

Quickly, easily remove or replace your prop with this kit. Each kit includes a prop nut and washer. A crescent wrench is required for installation.   Features: Compatible with Minn Kota Props:MKP-33 Weedless Wedge 2 (part number 233160 /...

MKP-33 Weedless Wedge 2 Replacement Prop by Minn Kota

This 100% weedless prop features a unique, patented design with swept-back and flared blades that “wedge” weeds away while conserving battery power. It helps you move through heavy vegetation – even at slow speeds. Fits 4" motor...

MKP-32 Weedless Wedge 2 Replacement Prop by Minn Kota

This 100% weedless prop features a unique, patented design with swept-back and flared blades that “wedge” weeds away while conserving battery power. It helps you move through heavy vegetation – even at slow speeds. Fits 3-5/8" motor...

i-Pilot Link Remote Charging Cable by Minn Kota

​This spare or replacement charging cable is compatible with all i-Pilot Link rechargeable remotes - both current and legacy. It features a USB adapter that lets you choose between AC and DC power and charges like a cell phone. (AC and DC...

Terrova CoPilot Remote by Minn Kota

​For Terrova and Riptide ST motors with the CoPilot system (sold separately) installed. This replacement wireless remote gives you control of speed, steering and prop on/off as well as giving you instant access to maximum speed (high-speed bypass) and...

PowerDrive Wireless CoPilot System Accessory by Minn Kota

​Wireless system allows you to control speed, steering and prop on/off on your PowerDrive trolling motor.  It installs easily with plug-n-play design located inside the side plate of the trolling motor mount. A plug is also included, allowing a...

MKA-23 Quick Release Bracket by Minn Kota

Easily remove your cable-steer, bow-mount trolling motor. High-yield composite construction is super strong and impervious to corrosion. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be...

MKA-21 Quick Release Bracket by Minn Kota

Easily remove your electric-steer, bow-mount trolling motor. High-yield composite construction is super strong and impervious to corrosion. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be...

XD Trolling Fin w/ Live Strike by Aqua-Vu

Troll with Real Time Video on your Aqua-Vu. Attaches in Seconds. The Live Strike™ System allows you to watch trolled or drifted lures and fish following and biting on the Aqua-Vu monitor, in REAL TIME as it happens...

MEGA 360 Ice Adapter Kit with GPS Puck by Humminbird

The MEGA 360 ICE Adapter includes all the components needed to convert a MEGA 360 Imaging transducer for use while ICE fishing. Features: Compatible with: MEGA 360 Imaging – Ultrex, MEGA 360 Imaging – Fortrex, MEGA 360 Imaging –...