Electronics Accessories

MKR-12 Quick Connect Plug by Minn Kota

For wiring where a plug and socket cannot be used. Heavy-duty 10-gauge connectors.   Features: Motor Side Cable Length – 6.66” Battery Side Cable Length – 11.66” Length overall when Connected – 18...

Raptor 8' Travel Cover by Minn Kota

Protects 8-foot Raptor models from road hazards while trailering. Custom fit with all-weather, corrosion-resistant zipper. UV resistant black neoprene. Not intended for use while on the water.   Features: Protects Raptor from road hazards while...

Talon Port Sandwich Adapter Bracket by Minn Kota

With unparalleled strength and an innovative modular design, mount Talon between your jack plate and transom OR between the outboard and transom, on the PORT SIDE of your boat. Keep Talon locked on your boat in any condition...

MKP-9 Prop Nut Kit by Minn Kota

Quickly, easily remove or replace your prop with this kit. Each kit includes a prop nut and washer. A crescent wrench is required for installation.   Features: Compatible with Minn Kota Props: MKP-2 Vanishing prop (part number 2061121 / 1865002)...

MKP-34 Prop Nut Kit by Minn Kota

Quickly, easily remove or replace your prop with this kit. Each kit includes a prop nut and washer. A crescent wrench is required for installation.   Features: Compatible with Minn Kota Props:MKP-33 Weedless Wedge 2 (part number 233160 /...

MKP-33 Weedless Wedge 2 Replacement Prop by Minn Kota

This 100% weedless prop features a unique, patented design with swept-back and flared blades that “wedge” weeds away while conserving battery power. It helps you move through heavy vegetation – even at slow speeds. Fits 4" motor...

MKP-32 Weedless Wedge 2 Replacement Prop by Minn Kota

This 100% weedless prop features a unique, patented design with swept-back and flared blades that “wedge” weeds away while conserving battery power. It helps you move through heavy vegetation – even at slow speeds. Fits 3-5/8" motor...

i-Pilot Link Remote Charging Cable by Minn Kota

​This spare or replacement charging cable is compatible with all i-Pilot Link rechargeable remotes - both current and legacy. It features a USB adapter that lets you choose between AC and DC power and charges like a cell phone. (AC and DC...

Terrova CoPilot Remote by Minn Kota

​For Terrova and Riptide ST motors with the CoPilot system (sold separately) installed. This replacement wireless remote gives you control of speed, steering and prop on/off as well as giving you instant access to maximum speed (high-speed bypass) and...

PowerDrive Wireless CoPilot System Accessory by Minn Kota

​Wireless system allows you to control speed, steering and prop on/off on your PowerDrive trolling motor.  It installs easily with plug-n-play design located inside the side plate of the trolling motor mount. A plug is also included, allowing a...

MKA-23 Quick Release Bracket by Minn Kota

Easily remove your cable-steer, bow-mount trolling motor. High-yield composite construction is super strong and impervious to corrosion. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be...

MKA-21 Quick Release Bracket by Minn Kota

Easily remove your electric-steer, bow-mount trolling motor. High-yield composite construction is super strong and impervious to corrosion. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be...

XD Trolling Fin w/ Live Strike by Aqua-Vu

Troll with Real Time Video on your Aqua-Vu. Attaches in Seconds. The Live Strike™ System allows you to watch trolled or drifted lures and fish following and biting on the Aqua-Vu monitor, in REAL TIME as it happens...

Low Profile Trolling Motor Mount for DSI Skimmer by Lowrance

Designed to mount a DSI transducer to the bottom of a trolling motor, the DSI Trolling motor adapter comes with a trolling motor snap-on mount, stainless steel trolling motor clamp and a pair of zip ties.  

HST-WSBL 83/200 kHz Transom Mount Skimmer w/ Temp Transducer by Lowrance

The HST-WSBL is a 7-pin, 83/200 kHz transom-mount Skimmer transducer with a built-in temp sensor. Key Features: 83 kHz With 52° Beam Width 200 kHz With 22° Beam Width Up to 1000-Foot (300-Meter) Range at 83 kHz 1 Internal Broadband...

XD Turntable Swivel Base by Aqua-Vu

Compatible with any Aqua-Vu HD Series, the Aqua-Vu XD Turntable eases cable management, allowing the camera spool unit to freely rotate. When placed on a boat deck, dock, ice or other flat surface, the XD Turntable conveniently spins for...

PC-27BL Power Cable by Lowrance

The PC-27BL is a power cable for Lowrance legacy LCX and LMS displays.  

7-Pin Transducer to 9-Pin Sonar Adapter Cable by Lowrance

The 7-to-9 Pin Transducer Adapter Cable connects 7-pin blue connector transducers to 9-pin xSonic display connectors.  

MEGA Live Open Water Adapter Kit by Humminbird

Adapter kit includes all accessories needed to convert the MEGA Live Imaging™ transducer for use on a boat.   Features: What's Included: Shaft clamp, and all required cables (transducer and shaft sold separately)...

MEGA 360 Ice Adapter Kit with GPS Puck by Humminbird

The MEGA 360 ICE Adapter includes all the components needed to convert a MEGA 360 Imaging transducer for use while ICE fishing. Features: Compatible with: MEGA 360 Imaging – Ultrex, MEGA 360 Imaging – Fortrex, MEGA 360 Imaging –...

HELIX ICE Conversion Kit by Humminbird

It has it all. Master power switch, quick-connect SAE power cables, large handle, multiple ¼"-20 mounting options for accessories, two rod holders, cable and transducer management, and a battery cover.   Features: Premium...

ICE PTC Helix 5 Portable Ice Kit w/ CHIRP Ice Transducer by Humminbird

The ICE PTC CHIRP H5 FB is a portable ice fishing kit for Humminbird HELIX 5 models with CHIRP sonar technology. Convert your HELIX 5 model for ice fishing with the included accessories: portable shuttle with carrying handle, premium Humminbird bag,...

Universal MEGA Live Hand Control by Humminbird

Every detail, in any direction, now for every boat. The Universal Hand Control for MEGA Live provides hand control steering of the MEGA Live transducer. Which brings this technology to virtually any boat, thanks to an adjustable GeigerTec mount,...

Helix Ice Conversion Kit - Mega 360 by Humminbird

The MEGA 360 ICE Adapter Kit includes everything you need to convert your HELIX 8, 9, or 10 G3N/G4N with MEGA Imaging for ICE fishing. See structure, the bottom and fish up to 125’ in every direction around your hole, powered by the unmatched...